|
Modular boiler plants.
Auxiliary maneuvering boilers—used alongside the main boilers for operation at reduced loads—and additional heat exchangers utilizing the boilers' exhaust gases result in fuel savings of 25%–30% per month. We specialize in the engineering development of such cost-effective boiler equipment and order its manufacture from well-known Polish manufacturers Ekogren, Płomex-Pol, FAKO, Moderator, Wytwórnia Kotłów CO TILGNER or Ultramodula.
As a general guideline for selecting the required capacity, assume 1 kW of power per 10 square meters of heated space. The actual required capacity may vary from this figure by a factor of 1.5 to 2, depending on the specific configuration and intended purpose of the modular boiler plant.
The following specifications for the modular boiler plant can be discussed and agreed upon based on the client's requirements:
- selection of boilers and the system layout, based on the required capacity and the intended function (e.g., heating-only, hot water supply, or a combined system);
- selection of primary fuel (various types of solid fuel, gas, or fuel oil) and backup fuel;
- lining of the module's interior walls with non-combustible, heat-insulating materials;
- placement of the module—either at ground level or on the roof of a building;
- level of automation for the modular boiler plant.
|
|
PLOMOTO Ltd
Poland,04-041, Warsaw,
Ostrobramska st. 101A, office 301
KRS: 0001142501, NIP: 1133153068, REGON: 540350615
|
|
t.: +48 883 081 288, +38 066 224 1803
|
tech@zzz-gate.com
|